SECTION 2: UNBOXING
9
10
2
Lift the Prep out of the lower box and place it on the bench. Make sure the location meets the requirements on page 4 for best results. The handles are located on the lower edge of the left, right, and back sides of the Prep; the foam base has cutouts for the handles.
Open the door by pushing gently upwards on the bottom of the door. Remove the rubber band securing the waste bin to the waste block, then undo the twist-tie holding the waste bin down. Remove the black plastic waste bin and twist tie, which contains the Prep’s accessories.
1
Remove the plastic wrap and make sure the following are present:
■ Hex Wrench Set P/N 6603180-01
■ Liquid Waste Bottle P/N 6600264-01
Do not lift or move the Prep with less than two people.
■ CO-RE Paddles P/N 186105 (if the Prep has 2 Independent Channels)
■ Teaching Needle P/N 182176
■ Surface Level P/N 56659-01
■ Waste Bag Wire Stand P/N 6603149-01
3
■ Replacement Fuses P/N 1524-11
14
15
Powered by FlippingBook